Machinery
Showing all 14 results
-
£12,600 + VAT New Kverneland 3632FN Front Mounted Mower Conditioner
£15,120.00Quick ViewKverneland 3632FT Front Mounted Mower Conditioner
Front mounted mower conditioners with SemiSwing steel tines, nylon tines or roller conditioning.
- SemiSwing Steel Tine Conditioning
- Innovative Suspension Design
- Flexible adaptation range of 670mm
- Variable Conditioner Rotor Speed
- Excellent visibility during transport and work
ALL OUR PRICES ON OUR NEW MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew or Harry for more info.
-
£13,300 + Vat New Kverneland 3232MN Centre Mounted Mower Conditioner
£15,960.00Quick ViewKverneland 3232MN Centre Mounted Mower Conditioner
Centre mounted mower conditioners with 125° vertical transport position
- Centre mounted spring suspension
- Optional hydraulic spring adjustment
- Vertical transport solution
- 600/900 rpm conditioner rotor
- Kverneland NonStop BreakBack system
ALL OUR PRICES ON OUR NEW MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew or Harry for more info.
-
£14,000 + VAT Ex Demo *SPECIAL OFFER* Kverneland 863 Bale Chopper/Feeder
£16,800.00Quick ViewEx Demo Kverneland 863 Bale Chopper
A key aim of the Kverneland 863 is to provide more capacity by shredding the material faster.
Flywheel housing and blowing paddles have increased in dimensions to increase performance. This means more material is fed faster into the flywheel, finishing the bale at an impressive pace.
- 3.0m2 Bale Chamber
- Single drum feed system
- 2-Speed gearbox for bedding or feeding configurations
Please call The office on 01229 820877 and ask for Andrew or Harry for more info.
-
£22,495 + VAT Ex Demo *SPECIAL OFFER* Kverneland Siloking Compact 12
£26,994.00Quick ViewKverneland Siloking Compact 12 from the Kverneland Siloking TrailedLine Classic Compact range featuring one turbo auger.
This is ideal, even for use in confined buildings with small or low passage. The short chassis of the TMR mixer is particularly flexible and easy to manoeuver. The drive and the frame are designed for maximum continuous load. Comprehensive equipment, such as the 2-speed gearbox from model Compact 10-T upwards, the underrun protection with lighting and the ladder mounted to the frame are standard. Thanks to its hopper geometry and the robust drive, the TMR mixer can be used not only for standard mixes but also for breaking up round bales and for cutting long-fibered feed
- Single turbo Auger
- Gearbox and Driveline
- Weighing systems
- Discharge options
- Straw Blower
- Wireless control
12 Months Warranty available
Please call The office on 01229 820877 and ask for Andrew or Harry for more info.
-
£3495+Vat Honda TRX500FA6 Auto 4×4 or 4×2 Quad Bike 2015 (65) P/S IRS
£4,194.00Quick View£3495+Vat Honda TRX500FA6 Auto 4×4 or 4×2 Quad Bike 2015 (65) P/S IRS
- Honda
- TRX500FA6
- IRS (independent rear suspension)
- Power steering
- Auto or Electric Shift Gears
- 4×4 or 4×2
- Heated grips
- Tyres would be best replaced
- Direct farm trade in.
- Plastics quite faded & a little rusty.
ALL OUR PRICES ON OUR USED MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew for more info.
-
£3650+ Vat Green Honda TRX500FA Hondamatic Auto 4×4 or 4×2 Quad Bike 2009
£4,380.00Quick View£3650+ Vat Green Honda TRX500FA Hondamatic Auto 4×4 or 4×2 Quad Bike 2009
- Honda
- TRX500FA
- Green plastics
- Hondamatic Auto or Electric Shift Gears
- 4×4 or 4×2
- Good aggressive tyres
- Tidy quad bike
- Fully serviced & ready for work
ALL OUR PRICES ON OUR USED MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew for more info.
-
£6720+VAT Bateson 60LT Axle Livestock Trailer Ramps / Sides / Deck Rings / Legs
£8,064.00Quick View£6720+VAT Bateson 60LT Axle Livestock Trailer Ramps / Sides / Deck Rings / Legs
12′ x 6’6 Livestock Trailer with demountable container
Model 60LT is a very popular and versitile livestock trailer. It has a 6′ (1.8m) high removeable livestock container and is fully galvanised. The chassis has deep section channel runners and a profiled drawbar, full width Avonride rubber suspension axles are fitted with 10″ (250 x 40) auto reversing brakes, 195-50 x 13 tyres and 5 stud wheels.
Four de-mounting jacks can be supplied as an option to assist the removal of the container complete with the ramp and gates, leaving a flat platform trailer with a one piece aluminium treadplate floor.
Standard equipment includes a folded treadplate aluminium ramp with lifiting springs, rear loading gates, front jockey wheel, side inspection door and spare wheel. Cross division gates can be supplied as an option if required. Also hinged sides and loading ramps for use with the container removed
Extras included
- 6 Recessed deck rings
- Jack legs to remove canopy
- 12” Steel sides with headstock & ladder rack removable
- Cattle cross division gate
- Interior light
- Twin loading ramps & carrier
- 3500kg gross
Brand new in stock ready to go
£6,720 + VAT or £8064 inc VAT
ALL OUR PRICES ON OUR USED MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew for more info.
-
£6999+ VAT Honda TRX520FA6 Auto Green 4×4 or 4×2 Quad Bike Road Reg (69) 2019
£8,398.80Quick View£7300+ VAT Honda TRX520FA6 Auto Green 4×4 or 4×2 Quad Bike Road Reg (69) 2019
- Honda TRX520FA6
- Auto gears
- IRS (independent rear suspension)
- Diff lock 4×4 or 4×2
- New Maxxis tyres
- Tidy quad bike
- Fully serviced & ready for work
ALL OUR PRICES ON OUR USED MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew for more info.
-
NEW Bateson 337S Cattle Trailer 14FT
Quick ViewThe new Eurostock 337S is now available with folding alloy decks and a full width external deck ramp. The trailer is the optimum size 14′ x 5’8″ to maximise the capacity within 3500kg gross weight. Larger trailers have a greater unladen weight, reduced payload and potential instability if the livestock move to the rear. The width is adequate for cattle to turn inside but not too wide to impede rear visibility or maneuverability.
The trailer offers the following features:
Fully folding decks with no loose parts or gates to fit.
Centre divider gate for use with sheep and can be used full height for cattle when required.
Rear cross gate incorporating a ramp fort he upper deck and a lower gate enabling the lower section to be filled first and closed whilst the remaining sheep are loaded on to the top deck.
Standard aerodynamic front with a hinge down vent flap providing air circulation to both decks.
Sliding side vents are positioned high on both decks to avoid them being blocked by animals.
The rear deck ramp is raised and lowered manually using a lever at either side. No gas struts, springs or catches to fail.
Low profile ramp with no rear protrusions or large feet, allowing it to be used on uneven ground and raised loading platforms often found in markets and abattoirs.
Low floor height, low centre of gravity and triple axles for excellent stability when moving livestock.
Front inspection doors both sides which can be opened during loading allowing more light and making it more inviting for the stock. They also make it alot easier to pressure wash the trailer from the front.
Front storage area with two gates in the bulkhead permitting stock to be driven out without entering the trailer.
One piece alloy treadplate roof providing space for bales and light hurdles if required (hooks can be fitted to the sides for hurdles as an option).
The decks can be fully deployed and stored within one minute. The front and rear halves can be used independently, half deck and half full height.
The sheep divisions can be removed and stored in the front if not required although the maximum pen length for sheep is 10′.
Full road lights including outline markers and side reflectors. Interior lamp, heavy duty ribbed jockey wheel, front mounted spare wheel and a lockable coupling.
Gross weight 3500kg.
Floor size 4300mm x 1700mm
Internal height (full width) 1850mm (6′)
Clearance under decks 900mm (3′)ALL OUR PRICES ON OUR USED MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew for more info.
-
New Kverneland 3228MN Centre Mounted Mower Conditioner
Quick ViewKverneland 3228MN Centre Mounted Mower Conditioner
Centre mounted mower conditioners with 125° vertical transport position
- Centre mounted spring suspension
- Optional hydraulic spring adjustment
- Vertical transport solution
- 600/900 rpm conditioner rotor
- Kverneland NonStop BreakBack system
ALL OUR PRICES ON OUR NEW MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew or Harry for more info.
-
New Kverneland TL1500 GEO Spreader
Quick ViewKverneland TL1500 GEO Spreader is GPS controlled, intelligent spreading (into a minimum of 1 metre sections) with the Exacta TL GEOSPREAD.
- CentreFlow spreading system
- Weighing system with unique reference sensor
- Prevent overlap with the GEOSPREAD system
- Section control with 1 metre sections
- MULTIRATE: multiple rates within a working width
ALL OUR PRICES ON OUR NEW MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew or Harry for more info.
-
No VAT Spider ILD01 Remote Control Banks Ruff Cut Mower New In 2021
£14,000.00Quick ViewNo VAT Spider ILD01 Remote Control Banks Ruff Cut Mower New In 2021
- Spider ILD 01
- 80cm cut
- Remote controll banks mower
- Kawasaki FS541 18hp petrol engine
- All wheel drive system
- Up to 3000 m2/hr
- 288kg
- Only 62hrs
- https://www.spidermower.co.uk/ild01/
- Private garden owner mower is in near perfect condition & is ready to go straight to work.
New RRP £22,400 + vat
£14,000 NO VAT
Please call The office on 01229 820877 and ask for Andrew for more info.
-
Used John Deere 1445 & 60″ Out Front Rotary mower
£10,794.00Quick ViewJohn Deere 1445 & 60″ Out Front Rotary mower
- Side Discharge Deck
- Glass cab with heater
- Deck has been shot blasted and fully reconditioned.
- Unit Has Been Fully Serviced
- Supplied by ourselves new 2010
- Has had a rear collector box on but now removed
ALL OUR PRICES ON OUR USED MACHINERY INCLUDE VAT.
Contact Andrew for more information on 01229 820877
-
Used Ransomes Marquis 51
£1,740.00Quick ViewRansomes Marquis 51
- Fully Serviced & Cylinders Sharpened
- Very tidy example & highly maintained by a local golf course
ALL OUR PRICES ON OUR USED MACHINERY INCLUDE VAT.
Please call The office on 01229 820877 and ask for Andrew for more info.
